• Model: KAYGO KG21W
• Inner Thermal Liner: 10 Gauge Brushed Acrylic
• Outer Knit Liner: 13 Gauge PE/Polyester/Fiberglass/Spandex
• Coating: Sandy Nitrile
• Coating Coverage: Palm & Fingers
• Cuff: 3D Snug Knit Wrist
• Standards: EN ISO 21420:2020+A1:2024; EN 388:2016+A1:2018; ANSI/ISEA 105-2024
• Cut Resistance: ANSI/ISEA 105-2024 A4
• Abrasion Resistance: ANSI/ISEA 105-2024 Level 4
• Tear Resistance: EN 388 Level 4
• Puncture Resistance: EN 388 Level 4
• EN 388 Rating: 4X44D
• Dexterity: EN ISO 21420 Level 5
• Cold-Weather Guidance: Approximately 20°F to 40°F (-7°C to 4°C), primarily for dry conditions
• Color Options: Gray, Black
• Size Range: S, M, L, XL
• Quantity: 2 Pairs

• Warmth That Keeps Hands Working – The 10-gauge brushed acrylic liner adds insulation for cold, primarily dry work while maintaining a flexible working feel for handling and tool use.
• Protection for Sharp, Rough Materials – Handle rebar, sheet metal, rough lumber and abrasive building materials with A4 cut resistance plus Level 4 abrasion, tear and puncture resistance.
• Steady Grip on Tools and Materials – Sandy nitrile coating across the palm and fingers creates textured contact with tools, metal parts and construction materials for a steadier hold during cold work.
• Work Without Constantly Removing Your Gloves – Flexible knit construction and touchscreen-compatible fingertips help with fasteners, tools, barcode scanners and basic screen tasks.
• Secure Liner for Easier On and Off – The inner and outer finger layers stayed together during removal testing, helping reduce liner pullout and making the gloves easier to put back on.

KG21W is best suited to construction, metal handling, industrial maintenance and outdoor repair in cold, primarily dry conditions. It supports handling rebar, sheet metal, rough lumber, pallets, tools and other materials where sharp edges, abrasive surfaces and cold exposure occur together.

KG21W is tested to ANSI/ISEA 105-2024 Cut Level A4 and EN 388 TDM Cut Level D. This level is suitable for many tasks involving sharp-edged materials, including sheet metal, rebar, rough lumber and glass handling. The gloves are cut resistant, not cut-proof, so protection should always match the material, edge condition and task.

Cold-weather guidance is approximately 20°F to 40°F (-7°C to 4°C), primarily for dry work. Actual warmth depends on activity level, exposure time, wind and moisture. KG21W is not intended for prolonged deep-freezer exposure; use temperature-specific protection when conditions fall outside this range.

No. The sandy nitrile coating covers the palm and fingers, but KG21W is not a waterproof glove. It is best used in cold, primarily dry conditions. For rain, prolonged wet handling, immersion or wet ice work, choose a glove with verified waterproof protection.

Yes. The fingertips support basic touchscreen tasks such as checking job information, scanning barcodes or taking a quick photo without removing the gloves. Responsiveness can vary by device, screen protector, glove fit and moisture, so detailed typing or precise screen control may still require removing them.

Yes. KG21W is machine washable; use a warm setting with mild detergent and tumble dry on low. In EN ISO 21420 testing, the inner and outer finger layers remained together during removal, helping reduce liner pullout during normal doffing.

Machine wash on a warm setting with mild detergent and tumble dry on low. To help keep the brushed acrylic liner in place, remove the gloves slowly from the cuff rather than pulling at the fingertips. Clean as needed to remove dirt and work residue. Before reuse, inspect the sandy nitrile coating, seams and liner; replace the gloves if wear or damage could affect grip, warmth or protection.

• KG21W EN 388 Compliance Certificate (PDF)
• KG21W ANSI/ISEA 105-2024 & EN 388 Test Report (PDF)